How to obtain Term-LAB Technical Support This article describes how to obtain Term-LAB technical support.
Term-LAB Magnum Troubleshooting Overview Wayne Harris discusses some of the more common problems that can be encountered when using Term-LAB Magnum or Rebel and the steps one should take to resolve the issue.
Term-LAB Magnum, Rebel, Term-PRO Download This article describes the procedure for downloading and installing the Term-LAB Magnum software.
Term-LAB Digital Multi-Meter Readout Configuration Training Module The Term-LAB Digital Multi-Meters (DMMs) are small digital readouts that are used to display the results of various measurements or calculations that are made by the Term-LAB program.
Term-LAB Magnum Hardware Troubleshooting This article describes the steps for identifying common hardware problems that could affect using the Term-LAB Magnum.
Term-LAB Magnum Troubleshooting This article describes basic troubleshooting for the Term-LAB Magnum and Rebel.
Term-LAB Magnum Power Probe Instructions This article describes how to assemble, configure, and use the Term-LAB Magnum Power Measurement Interface (Power Probe).
Preparing Your Computer for Term-LAB Magnum This article outlines the recommend best practices for configuring your computer for use with Term-LAB Magnum or Rebel.
Term-LAB Classic Software Installation This article describes the procedure for re-installing Term-LAB Classic software.
Term-LAB Activation Issues This article describes various techniques to use when troubleshooting activation problems.
How To Run Term-LAB On A Mac Term-LAB is not available as a native OS application. This article describes how to install and run Term-LAB on a MAC by using Bootcamp or Windows Virtualization.
Power Measurements with Term-LAB Training Proposal IU2 This paper fulfills the requirements for the Instructional Unit 2 assignment in EDTC 6321: Task Analysis, Performance Objectives, and Assessments
Power Measurements with Term-LAB Training Proposal IU1 This paper fulfills the requirements for the Instructional Unit 1 assignment in EDTC 6321: The Learners, their Environment, and the Instructional Goal.
The Connection Has Been Reset When launching Term-LAB Magnum you receive an error message stating that, 'The connection has been reset'.
Term-LAB On-Line Training Proposal The goal for this training tutorial is to educate the Term-LAB customer on the proper assembly of the Term-LAB hardware components, provide instructions on how to download and install the software application, and then to demonstrate the basic operation of the system.
Term-LAB Training Survey Overview Project 1 - Term-LAB Training Survey Overview
Wayne Harris Discusses Amplifier Power Measurements In this article Wayne Harris discusses amplifier power measurements.
Term-LAB 2018.09.14 Released A new version of the Term-LAB Magnum software is available. This is a major update and includes support for DC Voltage measurements with the Power Probe.
Check for Term-LAB Magnum Software Update This article describes how to have Term-LAB Magnum automatically check for software updates.
Recommended Multi-Monitor settings for Bagger Beatz This article describes the recommended Multi-Monitor settings for Bagger Beatz competition.
Term-LAB Slow or Unresponsive Term-LAB may not run or may not run properly when Windows updates are taking place.
Spectre and Meltdown Vulnerabilities Affect Most Modern Computers Two huge vulnerabilities that affect practially all modern computers have been recently discovered.
Term-LAB Crashes While Loading This article provides several troubleshooting techniques to try if Term-LAB won't load.
SPL Competition using Term-LAB RTA Microphone This article describes the procedure for configuring the Term-LAB for SPL competition using the Term-LAB RTA microphone.
SPL Competition using XLR Microphone This article describes the procedure for configuring the Term-LAB for SPL competition using an XLR microphone.
Basic RTA Measurements with the Term-LAB RTA Mic This article describes how to use the Term-LAB RTA Microphone for basic RTA measurements.
How To Configure Multi-Monitor Support in Term-LAB This article desribes how to configure the Term-LAB measurement system to display information on additional video displays that are connected to your computer.
Bagger Beatz Configuration This article describes the correct settings to use with the Bagger Beatz competition format.
Maximize Computer Performance This article describes how to maximize computer performance on a Windows PC.
Term-LAB Magnum Power Measurement This article describes the various techniques for measuring power with the Term-LAB Power Probe accessory.
Term-LAB Magnum Software Installation Troubleshooting This article outlines various troubleshooting tips for problems related to the installation of the Term-LAB Magnum software.
Term-LAB Classic Sensor Troubleshooting This article describes how to find problems with sensors or sensor cables in a dual-sensor Term-LAB Classic system.
dBTV Configuration This article describes the steps required for configuring a dBTV linked event.
Super Power Measurements With Magnum This article describes a technique for making very large power measurements.
Error Code 3E - Input Past End of File This article describes how to fix Error Code 3E - Input Past End of File errors when upgrading the Term-LAB software.
How To Locate Picture and Result Files Term-LAB gives you the ability to capture screen shots and take photos from a webcam during an event.
Recommended Multi-Monitor Settings for dBDRA The Term-LAB Multi-Monitor features offers the user great flexibility when displaying scoring information.
Finding Your Peak Frequency Every competition vehicle has a frequency where a maximum SPL will be achieved. This article describes one technique for finding this frequency.
How To Publish Social Media From Term-LAB Term-LAB supports publishing to Facebook and Twitter. This article describes the procedure for using this feature.
LED Leaderboard Configuration This archival document describes the procedure for attaching a Leaderboard display to your computer and setting up Term-LAB for proper operation.
How To Use Live Updates in Term-LAB Term-LAB now has the ability to upload live event results, screen shots, and webcam images to the Termpro server during a competition.
Term-LAB Measurement Does Not Start Some older Term-LAB systems may not acquire data when connected to computers with certain USB chipsets.
Rail Voltage Warning Messages This article provides step-by-step instructions for identifying the cause of Term-LAB rail-voltage warning messages.
How To Enable Hidden Folders in Windows This article provides step-by-step instructions for making hidden Windows folders visible.
Error Code 372 This article provides some potential solutions for users who encounter Error 372 when launching the Term-LAB application.
Term-LAB Top Dog Mode This article describes how to configure and use Term-LAB when judging a dBDRA sanctioned Top Dog event.
Term-LAB 12 Light Tree Interface This article describes the procedure for constructing a light tree that consists of 12 lights per lane.
Basic Instructions for Custom SPL Mode This articles describes how to configure the Custom SPL Judging Mode in Term-LAB.
Pancadao Measurement Configuration This article describes how to configure Term-LAB for Pancadao competition. (The Broadband RTA Upgrade is required for Pancadao measurements.
SPL Measurements with Broadband RTA This article describes how to configure the Term-LAB Broadband RTA for SPL measurements.
Term-LAB Ad Slideshow This article describes how to configure Term-LAB so that a slideshow will be displayed on external monitors whenever the Term-LAB meter is idle.
Broadband RTA Scoring Computer This article describes how to configure the Term-LAB Broadband RTA Scoring Computer.
Sound Quality RTA Configuration This article desribes how to connect the Broadband RTA microphone and configure Term-LAB for Sound Quality measurements.
IASCA Configuration for Term-LAB This article describes the configuration settings that should be made to comply with IASCA IdBL and Bass Boxing competition.
How to configure the Mute threshold in Term-LAB Term-LAB will normally mute SPL readings below 120 dB. This article describes the procedure to use to configure the mute threshold.
Term-LAB Software License Description This article describes the licensing method used by Term-LAB software.
How to add a custom Company Logo to Term-LAB This article describes how to add a custom logo to Term-LAB
Troubleshooting Sensor Noise This Term-LAB troubleshooting article describes the technique to use when tracking down excessive noise readings on your Term-LAB system.